|
|
Post by josh573a on Apr 17, 2020 4:17:13 GMT
Does anyone know the name of the motor or the motors model number? im trying to find out some more in death information about it. I did once use the name printed on the motors sticker but I can not do that right now since we are all stuck at home.
Thanks for any help!
|
|
|
|
Post by deni on Apr 19, 2020 5:23:18 GMT
|
|
|
|
Post by josh573a on Apr 22, 2020 2:53:31 GMT
Yes I did check the data that is there, however I was looking for some other data that I have now found. For anyone looking into this page in the future the motor is a MY1018, this is the one with the aluminum diecast zinc housing. I have also seen the MY1016Z in use at Evolocity, this has a black painted steel middle section with extra mounting holes.
|
|
hex
New Member
Posts: 3
|
Post by hex on Apr 25, 2020 6:01:17 GMT
Seeing as the My1018 is rated for 450w and the newer standard class motor with the black middle section is rated for 350w, will the My1018 motor still be allowed in the competition?
|
|
|
|
Post by josh573a on Apr 25, 2020 6:49:18 GMT
I think both will be fine(has been the last 3 years), since the controller is the limiting power factor
|
|
